Operation
Extended drying
If desired drying results are not consistently achieved, the turbothermic cooling fan can be programmed to run an extra 14 minutes at the end of each program.
The "Extended drying" feature can also be activated to prevent condensation from collecting on the steam deflector.
Turning extended drying on/off
^Turn off the dishwasher.
^Press and hold the & (19) and "Start/Stop" (21) buttons and at the same time turn the dishwasher on using the "On/Off" button.
Release all buttons.
The time display will show P and two figures. The "Salt" indicator will flash and the "Energy Saver" and "Sani Wash" indicators will light.
If this is not the case, the above steps must be repeated.
^Press the "Economy" program button.
One of the following will appear in the time display:
–90: extended drying is off.
–91: extended drying is on.
^Press the "Top Solo" button to change the selection.
^Press the "Start/Stop" button.
SP for "Save" will appear in the time display.
^Press the "Start/Stop" button again.
The changed extended drying feature will be stored.
All program indicators will light and the "Start/Stop" indicator will flash.
^Turn off the dishwasher.
38
