en
Finishing vacuuming
–if vacuuming started from the base station
The robot vacuum cleaner will return to the base station automatically and recharge.
The robot vacuum cleaner will also return to the base station and recharge when there is low battery capacity.
IIwill appear in the clock indicator in the display. The robot vacuum cleaner will then continue vacuuming.
–if vacuuming started from somewhere in the room
The robot vacuum cleaner will return to its starting point and switch to standby.
The robot vacuum cleaner will stand still when there is low battery capacity. You should then recharge it.
Manually controlled vacuuming
You can use the direction buttons on the remote control to vacuum a particular area of the room.
While the robot vacuum cleaner is vacuuming, press and hold one of the direction buttons.
The robot vacuum cleaner will travel in the desired direction and continue to vacuum.
Interrupting vacuuming
Press the II button on the remote control.
Press the button again to continue vacuuming.
Manual navigation (without vacuuming)
You can use the direction buttons on the remote control to direct the robot vacuum cleaner to a specific area of the room.
Press and hold one of the direction buttons.
The robot vacuum cleaner will travel in the desired direction without vacuuming.
You cannot direct the robot vacuum cleaner manually to the base station in order to recharge it.
Directing the robot vacuum cleaner to the base station
Press the Base button on the remote control.
The robot vacuum cleaner will travel to the base station and recharge. The base station contact indicator will go out.
14
