en
The settings will be displayed for approx. three seconds.
The robot vacuum cleaner will now start to vacuum at the same time each day.
The Timer indicator lights up to show that the timer has been activated.
Deactivating the acoustic signals
The acoustic signals are activated as standard. You can deactivate and then reactivate them.
To alter the entries, proceed as described previously.
Deactivating the timer
Press the Timer button on the remote control briefly.
The Timer indicator will go out.
Pressing the Timer button again will reactivate the timer. The Timer indicator
will light up and the robot vacuum cleaner will begin vacuuming at the set start time.
Displaying a set start time
Press the Timer button on the remote control briefly.
The set start time will appear in the display.
Please remember that doing this will deactivate the Timer. Press the Timer button again to reactivate it.
Press the OK button on the remote control for at least three seconds.
Acoustic signals for fault messages cannot be deactivated.
Reducing the maximum crossing over height
The robot vacuum cleaner is set as standard so that it can negotiate a height of up to 3/4" (20 mm).
This allows it to vacuum carpets, cross over thresholds, etc.
If you would like to reduce this height in order to protect chair or table legs, or lamps for example, you can deactivate the factory default setting.
Press the Base button on the remote control for at least three seconds.
"LO" will appear in the clock indicator in the display.
Press the Base button again for at least three seconds if you want to reactivate the maximum crossing over height of 3/4" (20 mm). "HI" will appear in the clock indicator in the display.
17
