Memorizing the Channels
Your TV can memorize and store all of the available channels for both 
or CH 
button to scan through the channels.
This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an air or a cable system).
T V | Channel |
Air/Cable | : Air |
Auto Program |
|
Channel Manager | |
Fine Tune |
|
Color System | : Auto |
1.Press the MENU button to display the menu.
Press the … or † button to select “Channel”, then press the ENTER button.
Move 
Enter 
Return
T V | Channel |
| |
Air/Cable | : Air | Air | |
Auto Program |
| STD | |
Channel Manager | HRC | ||
Fine Tune |
| ||
: Auto IRC | |||
Color System | |||
Move | Enter | Return | |
2.Press the ENTER button select “Air/Cable”.
Press the … or † button to select “Air”, “STD”, “HRC” or “IRC”, then press the ENTER button.
➢If you are using an Air antenna, leave “Air” displayed. If you are using a cable antenna, press the … or † button to display the type of cable system: “STD”, “HRC” or “IRC”. (If you are not sure which type of cable system you have, contact your cable company).
Press the EXIT button to exit.
➢STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected.
Storing Channels in Memory (Automatic Method)
T V | Channel |
|
Air/Cable | : Air |
|
Auto Program |
|
|
Channel Manager |
| |
Fine Tune |
|
|
Color System | : Auto |
|
Move | Enter | Return |
Auto Program |
| |
|
| Air 3 |
Start |
| |
Enter | Return | |
1.Press the MENU button to display the menu.
Press the … or † button to select “Channel”, then press the ENTER button.
2.Press the … or † button to select “Auto Program”, then press the ENTER button.
3.Press the ENTER button.
The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears.
Press the EXIT button to exit.
➢ • All available analog channels are automatically stored in memory.
• It takes approximately 3 to 10 minutes to memorize channels.
