Samsung PL-42E91H manual Reducing the Effects of Screen Burn, Setting the Hdmi Black Level

Reducing the Effects of Screen Burn

If screen burn has occurred, you can select a white screen or signal pattern (rolling screen) to help remove screen burn artifacts.

T VScreen Burn Protection

Pixel Shift

All White
Signal Pattern
Side gray	: Dark
Move	Enter	Return

T VScreen Burn Protection

Pixel Shift

All White

Signal Pattern
Side gray	: Dark
Move	Enter	Return

T VScreen Burn Protection

Pixel Shift

All White

Signal Pattern

Side gray	: Dark
Move	Enter	Return

T VScreen Burn Protection

Pixel Shift

All White

Signal Pattern

Side gray : Dark

1.Press the MENU button to display the menu.

Press the … or † button to select “Setup”, then press the ENTER button.

2.Press the … or † button to select “Screen Burn Protection”, then press the ENTER button.

3.Press the … or † button to select “All White”, “Signal Pattern”, or “Side gray”, then press the ENTER button.

Press the EXIT button to exit.

All White: This function removes after-images on the screen by changing the color of pixels to white. Use this function when there are remaining after-images or symbols on the screen especially when you displayed a still image on the screen for a long time.

Signal Pattern: This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after-images or symbols on the screen especially when you displayed a still image on the screen for a long time.

Side gray: When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides.

Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.

Light: When you set the screen ratio to 4:3, it brightens the left and right sides.

➢To remove after-images on the screen, use either the “All White” or “Signal Pattern” function. Although both functions remove after-images on the screen, “Signal Pattern” is more effective.

➢The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after-images on the screen. If the after-image is not removed after performing the function, repeat the function again.

➢Press any key on the remote control to cancel this feature.

Move Enter Return

Setting the HDMI Black Level

Using this function, you can adjust the image quality when the screen burn (appearance of black level, low contrast, low color, etc.) is encountered by the HDMI input for RGB limited range (16 to 235).

T V		Setup
	More
	PC
	Home Theater PC : Off
	Light Effect	: Standby Mode On
	Energy Saving	: Off
	Screen Burn Protection
	HDMI Black Level : Normal
	More
	Move	Enter			Return
T V		Picture
	More
	PC
	Home Theater PC : Off
	Light Effect	: Standby Mode On
	Energy Saving	: Off
	Screen Burn Protection
	HDMI Black Level :		NormalNormal
	More			Low
	Move	Enter			Return

1.Press the MENU button to display the menu.

Press the … or † button to select “Setup”, then press the ENTER button.

2.Press the … or † button to select “HDMI Black Level”, then press the ENTER button.

3.Press the … or † button to select “Normal” or “Low”, then press the ENTER button.

Press the EXIT button to exit.

➢ This function is active only when the externel input connects to HDMI(RGB signals).

English-45