Installation
Before installation
^Before installation remove the cover strip, sealing strip and other accessories from the appliance and from the external rear wall of the appliance.
^On no account should the spacers be removed from the back of the appliance. These ensure the gap required between the back of the appliance and the wall is maintained.
^Remove any cable clips from the rear of the appliance.
^Check that all parts at the back of the appliance are unhindered. Carefully remove any hindrance.
Does your old appliance have a different hinging mechanism?
If your old appliance had a different type of hinging, the furniture door can still be used. Remove the old hinges from the housing unit. They are no longer required because the furniture door is now fitted to the appliance door. All the necessary parts are supplied or can be ordered from the Miele Spare Parts Department.
Stainless steel front
(depending on model)
The old door can be replaced by a stainless steel front if required.
This is available from your dealer/Miele Chartered Agent or the Miele Spare Parts Department.
35
