Adjusting the interior fittings
Moving the shelves
The shelves can be adjusted according to the height of the food.
^Raise the shelf, and pull it forwards slightly until the notch at the side is in line with the shelf support. It can then be raised or lowered to the required level.
The raised edge at the back must face upwards to prevent food from touching the back of the appliance and freezing to it.
Stoppers prevent the shelves from being dislodged by mistake.
Split shelf
In order to accommodate tall items in the appliance, one of the shelves is divided. The front section can be pushed under the rear section.
^Pull the front half of the glass shelf forwards slightly and then push it carefully under the rear half.
To move the split shelf:
^Take both halves of the split glass shelf out,
^fit the two brackets onto the supports on either side at the required height,
^and push the glass shelves in one after the other. The shelf with the raised edge must be at the back.
23
