»»When the SURR indicator on the main unit turns off, two-channel stereo sound is on, ideal for listening to music.
Equalizer
Change the high frequency (treble) and low frequency (bass) settings of the SoundBar.
1 Press TREBLE +/- or BASS +/- to change the frequency.
»»The current source indicator blinks once every time you press TREBLE +/- or BASS +/-.
»» All the source indicators blinks once simultaneously when treble or bass is set to the maximum or minimum value.
Night mode
For quiet listening, decrease the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks.
1 Press NIGHT MODE to turn night mode on or off.
»»When night mode is turned on, the SURR indicator blinks once.
»»When night mode is turned off, the SURR indicator blinks twice.
MP3 player
Connect your MP3 player to play your audio files or music.

4Use your SoundBar

This section helps you use the SoundBar to play audio from connected devices.

Before you start

Make the necessary connections described in the quick start guide and the user manual.

Switch the SoundBar to the correct source for other devices.

Adjust the volume

To increase or decrease volume, press +/- (Volume).

The Source indicators on the front panel blink once when the volume is set to either minimum or maximum.

To mute sound, press (Mute).

The current Source indicator on the front panel blinks continuously.

To restore the sound, press (Mute) again or press +/- (Volume).

E n g l i s h

Choose your sound

This section helps you choose the ideal sound for your video or music.

Surround sound mode

Experience an immersive audio experience with surround sound modes.

Press SURR repeatedly to select surround mode or stereo mode.

»»When surround mode is on, the SURR indicator on the main unit lights up. Creates a surround listening experience.

What you need

• An MP3 player.

• A 3.5mm stereo audio cable.

1 Using the 3.5mm stereo audio cable, connect the MP3 player to the AUDIO-IN connector on your SoundBar.

2 Press AUDIO IN on the remote control.

EN 9

Page 10
Image 10
Philips HTL5110F7 Adjust the volume, Choose your sound, Surround sound mode, Press Audio in on the remote control