Note
••The music streaming may be interrupted by obstacles between the device and SoundBar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency.
••If you want to connect your SoundBar with another Bluetooth device, press and hold 
Bluetooth on the remote control to disconnect the currently connected Bluetooth device.
••Philips does not guarantee 100% compatibility with all Bluetooth devices.
Auto standby
When playing media from a connected device, the SoundBar automatically switches to standby if:
•no button is pressed for 29 minutes, and
•no audio play from a connected device.
Apply factory settings
You can reset your SoundBar to the default settings programmed at the factory.
1
5 Wall mount
Note
••Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage. If you have any query, contact Philips Consumer Care in your country.
••Before wall mounting, make sure the wall can support the weight of your SoundBar.
••Before wall mount, you need not remove the three rubber feet at the bottom of the soundbar, otherwise the rubber feet cannot be fixed back.
Screw length/diameter
Depending on the type of wall mounting your SoundBar, make sure that you use screws of a suitable length and diameter.
4mm
> 25mm
For information about how to wall mount your SoundBar, see the quick start guide.
E n g l i s h
EN 11
