Building in the appliance
Preparing the appliance
^Slide cover strip a into the holder in the middle of the appliance as illustrated with the bumps facing downwards. The bumps will fit into the keyhole slots.
^Position the mains electricity cable so that the appliance can be connected easily once installed.
^Push the appliance
When doing this, make sure that the mains cable does not get trapped.
^With 16 mm thick furniture walls Clip spacers b over the hinges.
^ Open the appliance door. |
^Secure plastic bracket c to the side opposite the hinges using screws d (M5 x 22).
^Attach fixing bracket e loosely to the appliance using screws f.
^If necessary shorten sealing strip g to the height of the niche and then remove the protective foil.
^Apply sealing strip g to the side of the appliance on which the door is opened so that it is flush with the front edge of the appliance. Sealing strip g should meet up with the lower edge of fixing bracket e.
42