Setting the temperature
Setting the temperature in the refrigerator and freezer sections
The refrigerator and freezer sections can be set independently of each other.
Touch the access button "" so it turns yellow.
Touch the sensor button for the refrigerator or freezer section so it turns yellow.
Use the and buttons next to the temperature display to set the temperature warmer or colder.
Tap the and sensor buttons to raise/lower the temperature 1°, or hold them down to move through the temperature range more quickly.
The temperature display on the control panel always shows the desired temperature.
When you have adjusted the temperature, wait for approx. 6 hours if the appliance is not very full and for approx. 24 hours if the appliance is full before checking the temperature, as it will take this long for the appliance to reach the temperature. If, after this time, the temperature is still too high or too low, you will need to adjust it again.
Temperature range
The temperature can be selected within the following ranges:
–Refrigerator:
36°F to 46°F (2°C to 8°C)
A temperature of 37°F (4°C) in the refrigerator section is recommended.
–Freezer:
7°F to
To freeze fresh food and store frozen food for an extended period of time, a temperature of 0°F
The room temperature and the installation location can affect the time it takes for the appliance to get to the desired temperature. If the room temperature is too high, it may not be possible for the appliance to reach the lowest temperature.
14
