Miele KF 1811 Vi, KF 1911 Vi, KF 1801 Vi Aligning the appliance, Installing the appliance

Installing the appliance

Aligning the appliance

￿Align the appliance with the custom front.

The installation aids ￿ on the appliance door have been designed for the following custom door thicknesses:

–3/4" (19 mm)

–1 1/2" (38 mm).

The height-adjustable feet at the front and rear can all be adjusted from the front:

–Front feet:

Adjust from the top ￿, with a rachet 5/16" (8 mm).

–Rear feet:

Adjust with a (cordless) screwdriver and/or a rachet 5/16" (8 mm) for fine adjustment ￿.

￿Use a level to align the installation aids ￿ on the door.

Important!

When unscrewing the height-adjustable feet, proceed gradually, alternating between left and right.

￿Unscrew the height-adjustable feet until the mark on the base has reached the indicated guide dimension 1 1/4" (32 mm). The guide dimension of 1 1/4" (32 mm) is related to a niche height of 84"

(2134 mm).

Important!

The height-adjustable feet can only be unscrewed as far as the mark 2 3/16" (62 mm) on the base (max. niche height of 85 3/16" (2164 mm).

￿ Align the custom doors with a level.

￿If using a wooden beam as an alternative anti-tip device, rotate the appliance all the way toward the wooden beam.

67