Electrical connection
,WARNING:
Disconnect the appliance from the main power supply before servicing. To reduce the risk of electric shock, make sure that the appliance is properly grounded after installation.
To guarantee the electrical safety of this appliance; continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician. The manufacturer cannot be held responsible for damages caused by the lack, or inadequacy of an, effective grounding system.
All electrical work should be performed by a qualified electrician in accordance with local codes and the:
-National Electrical code ANSI / NFPA No.
or
-Canadian Electrical Code Part I (CSA Standard C 22.1)
for Canada
Note to the installer:
Please leave these instructions with the consumer.
Power supply:
–240 V, 60 Hz, 15 A fuse rating
or
–208 V, 60 Hz, 15 A fuse rating
The oven is equipped with a power cord consisting of 3 leads. They must be connected to a dedicated line through the use of an approved junction box
Black : connect to L1 (hot)
Red: connect to L2 (hot)
Green: connect to GND (ground):
For further information, see the wiring diagram provided with the appliance.
WARNING:
THIS APPLIANCE MUST BE GROUNDED
14
