IMPORTANT SAFETY INSTRUCTIONS
Installation
When using your appliance, follow basic safety precautions including the following:
Read all instructions before using for the first time.
Be certain your appliance is properly installed and grounded by
a qualified technician.
To guarantee the electrical safety of this appliance; continuity must
exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician. The manufacturer cannot be held responsible for damages caused by the lack or inadequacy of, an effective grounding system.
Do not connect the appliance to the main electrical supply using an
extension cord. Extension cords do not meet the safety requirements of this appliance.
Before servicing, disconnect the power supply by either removing
the fuse, shutting off the power main, or manually "tripping" the circuit breaker.
Correct usage
Do not operate the appliance until it is properly installed in the
countertop.
This appliance is intended for residential use only.
Use the appliance only for its intended purpose. The
manufacturer cannot be held responsible for damages caused by improper use of the fryer.
Never use the appliance to warm or heat the room.
Only use oils or fats that are recommended for deep fryer use.
Never mix different types of oil and fat.
Turn on the fryer only after the lid is removed and it is filled with oil or
water.
Do not switch on the appliance when the heating element is raised
for cleaning.
Always lower the heating element into the operating position when
the appliance is not in use.
This appliance must not be set up or operated outdoors.
This equipment has not been designed for maritime use or for
use in mobile installations such as aircraft or recreational vehicles. However, under certain circumstances it may be possible for an installation in these applications. Please contact the nearest Miele Dealer or the Technical Service Department with specific requirements.
4
