Re-assemble the burner as follows see illustration | Miele KM 417

Cleaning and care

Re-assemble the burner as follows (see illustration):

^Make sure that all the locating tabs and notches line up exactly. Place the burner head c on to the burner base f so that the ignitor and the ignition safety device extend through their respective holes in the burner head. The burner head must click into place correctly.

^Replace the burner cap b ensuring that the locating tabs fit into the notches in the burner head.

Important: replace parts in the correct order after cleaning.

1.Do not replace the parts upside down.

2.The locating tabs must fit exactly into the notches.

18

Image 18

Miele KM 417 manual Re-assemble the burner as follows see illustration

Contents

Operating instructions Gas hob Contents Description of the appliance Building in and connection Correct usage Safety with children Protecting the appliance from damage Protection from burningPage Appliance faults Further safety notes Caring for the environment Disposal of the packing materialDisposal of your old appliance Before using for the first time Cleaning and heating up for the first timeGeneral notes Switching on Using the gas hobSwitching on, Switching off, Controls Switching off Pans Burners Min. pan baseTop of pan in cm Safety cut-out Use during a power cut Cleaning and care Cloth Pan supports, controls Ceramic surface Burners Dismantle the burner as follows Re-assemble the burner as follows see illustration Gas flame goes out after being lit Problem solving guideWhat to do if Burner does not ignite after several attempts Ignitor on the burner does not spark United Kingdom Connection to servicesGas connection Ireland Electrical connection Important U.K Connection to services After sales service Data plate Alteration rights reserved