Problem solving guide
Repairs to the gas and electrical components of this appliance must only be carried out by a suitably qualified and competent person to ensure safety. Unauthorised repairs could be dangerous.
However, some minor problems can be resolved as follows:
What to do if ...
... the burner does not ignite after several attempts
Check whether
–The burner is correctly assembled.
–The gas supply tap is turned on.
–The burner is dry and clean.
–The flame slits are clean and unblocked.
–The mains fuse has blown. If this is the case, call an electrician or the Service Department. (The gas can be lit with a match). See "Use during a power cut".
... the gas flame goes out after being lit
Check whether the burner cover is correctly assembled.
... the ignitor on the burner does not spark
Check whether food deposits have lodged themselves between the ignitor and the burner cover.
Carefully remove any soiling. Do not let the ignitor get wet.
... the flame suddenly looks different
Check whether the burner is correctly assembled.
19
