Programming
The programming of your cooktop can be modified (see chart).
After starting the programming function P (Program) and an S (Status) will appear in the timer display. With cooktops that have 3 burners, an additional display appears at the back left.
The program is displayed in the front left and back left burner displays. Example:
Program 03 = front left 0, back left 3 Program 14 = front left 1, back left 4
The status is displayed in the front right burner display.
Once you have left the programming mode, the cooktop will be reset automatically. This is completed when an indicator above the On/Off touch control lights up briefly.
Do not turn the cooktop on again until the reset process is completed.
To start programming
With the cooktop turned off, touch and hold the control and $ at the same time, until the Child safety lock indicator flashes.
To set the program
To set the first number, touch the control for the front left burner followed by the respective number on the settings bar.
To set the second number, touch the control for the back left burner followed by the respective number on the settings bar.
To set the status
Touch the control for the front right burner followed by the respective number on the settings bar.
To save the settings
Touch the control until the displays go out.
If you do not wish to save the settings
Touch the $ control until the displays go out.
30
