Use
Turning ON
The cooktop must be turned on before any of the burners can be used.
Do not leave the appliance unattended during operation!
To turn the cooktop On:
Touch the On/Off touch control .
The
-will appear in all the burner displays. If no further entry is made, the cooktop will turn itself off after a few seconds for safety.
To turn a burner on and select a power level
Touch the On/Off touch control for the desired burner.
0 appears in the burner display.
Touch the desired power level number on the settings bar.
For a setting between two power levels (see "Power settings"), press the area between the numbers.
The power level setting will flash for a few seconds and then remain steady.
To change the power level
Touch the On/Off touch control for the desired burner.
The power level will flash in the burner display.
Touch the respective number on the settings bar to set the desired power level.
If only one burner is on, the power level can be changed without activation.
14