IMPORTANT SAFETY INSTRUCTIONS

Technical safety

￿Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty.

￿Be sure your appliance is properly installed and grounded by a qualified technician.

￿Before installing the cooktop, check for externally visible damage. Do not operate a damaged appliance.

￿To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician.

￿Before installation, make sure that the voltage and frequency listed on the rating label correspond with the household electrical supply. To prevent injury and appliance damage, these data must match. Consult a qualified electrician if in doubt.

￿Do not use an extension cord to connect this appliance to the electrical supply. Extension cords do not ensure the required safety of the appliance.

￿Install the appliance so that the power cord does not come into contact with any portion of the cooktop which may become hot during use.

￿Do not use the appliance until it has been properly installed in the countertop.

￿Before servicing, disconnect the appliance from the main power supply.

￿Do not operate any appliance with a damaged cord or plug, or if the appliance has been damaged in any manner. Contact Miele’s Technical Service Department.

￿Under no circumstances open the outer casing of the appliance.

￿While the appliance is under warranty repairs should only be performed by an authorized service technician. Otherwise the warranty is void.

￿In the event of any damage to the appliance, it must be turned off immediately and disconnected from the main power supply. Contact Miele’s Technical Service Department.

Do not use the appliance until it has been repaired. Ensure power is not supplied to the appliance until repair work is completed.

￿Defective components should be replaced by Miele original spare parts only. Only with these parts can the manufacturer guarantee the safety of the appliance.

￿Do not cook on a broken cooktop. Any breakages or cracks in the ceramic surface of the appliance are defects and must be treated as such. If the cooktop should break, cleaning solutions and spills may penetrate the broken cooktop and create a risk of electric shock. Do not use the appliance until it has been repaired.

5

Page 5
Image 5
Miele KM 5820 installation instructions Technical safety

KM 5820 specifications

The Miele KM 5820 is a high-performance induction cooktop designed for modern kitchens where efficiency and ease of use are paramount. With its sleek appearance and cutting-edge technology, this model is engineered to cater to both amateur cooks and professional chefs alike.

One of the standout features of the Miele KM 5820 is its powerful induction technology. Induction cooking uses electromagnetic energy to heat cookware directly, resulting in quicker cooking times and enhanced energy efficiency. Compared to traditional gas or electric cooking methods, induction delivers precise temperature control, allowing for perfect searing, frying, and simmering. The KM 5820 heats up in seconds and can go from a gentle simmer to a rolling boil with remarkable rapidity, which significantly optimizes meal preparation.

The cooktop boasts a generous cooking area with up to four cooking zones, providing ample space to accommodate multiple pots and pans simultaneously. Each zone features a residual heat indicator, ensuring safety by alerting users when the surface is still hot. The intuitive TouchControls make it easy to adjust settings quickly, while the sleek surface is simple to clean, as spills do not burn onto the cooktop.

Another notable technology featured in the Miele KM 5820 is its Smart Select functionality. This feature allows users to easily select a cooking zone and adjust the power level with a simple swipe across the control panel, making it user-friendly even for those who may be less experienced with high-tech kitchen equipment. Additionally, the cooktop includes a timer function for each cooking zone, enabling precise cooking times without the risk of overcooking.

Safety is also a key consideration in the design of the KM 5820. It includes a lock function that prevents unintended use, along with an automatic shut-off feature that activates after a certain period of non-use or if a zone is accidentally left on.

Overall, the Miele KM 5820 combines innovative technology with elegant design, making it a top choice for anyone looking to elevate their cooking experience. Its commitment to energy efficiency, safety, and ease of use exemplifies Miele's reputation for producing premium kitchen appliances that stand the test of time while delivering exceptional performance.