Operating principals
The hob is equipped with electronic sensor controls which
react to finger contact.
To operate the hob, touch the relevant sensor. Each time you
touch a sensor, an audible tone sounds.
In order to set or alter a power level or the time (depending
on model), the cooking zones and the timer must be "active".
To activate a cooking zone or the timer, touch the sensor for
selecting the relevant cooking zone or the timer. After you
have touched the sensor, the relevant cooking zone or timer
display will start to flash. The cooking zone or the timer is
"active" whilst the displays are flashing and you can set a
power level or time.
Exception:
If only one of the cooking zones is in operation, you can alter
the power level without activating the cooking zone.
Take care to keep the control panel clean and do not
place anything on top of it. The sensors may fail to react or
they could mistake the article or any dirt for a fingertip
contact, thereby activating a function or even causing the
hob to switch off automatically (see "Safety switch-off".)
Never place hot pans on the sensors. The electronic unit
underneath could get damaged.
Operation
25