Installation
Preparing the installation niche
Keep the appliance doors closed until it is securely fastened in the niche. Tipping hazard.
^Choose the desired switching contact and connect according to alarm system requirements.
Output of the Home Security System on the electronic board:
NC: normally closed
Com: common
NO: normally open
Switching capacity: 120 V/250mA 30 V/1A
^Continue with the appliance installation.
If the installation niche is deeper than the appliance, a solid wooden beam a can be placed behind the
The length of the wooden beam a should be to the width of the installation space.
If possible, always screw the wooden beam into existing studs on the rear panel of the niche.
Mounting Accessories
The mounting accessories needed for installing the appliance into the niche are included in the packaging. Several plastic bags are included which are numbered alphabetically.
The bag needed for each step will be marked with its respective letter.
^Use the included Torx screwdriver to tighten the screws.
46
