Installation
In a cabinet without a back wall
screw the cabinet to the wall behind it in several places using suitable mounting brackets.
For this, use suitable plugs/screws depending on the type of wall.
Securing an alternative anti-tip device
If the
Ensure that there is no "give" between the appliance and the
If possible, always screw the wooden beam to existing studs.
–Cut a wooden beam (cross section min. 3" x 4"
[75 mm x 100 mm]) to the required length.
–The length is equal to the width of the installation niche.
–If the installation cavity is deeper than the appliance, select a beam which has a larger cross section, or attach two beams.
49
