Maintenance and care
When to change the thread catcher pads
Check the thread catchers on the suc- tion inlet of the floor brush and the up- holstery nozzle from time to time. Re- place them if the pile is worn.
Replacing the thread catchers
^ Use a screwdriver or similar object to remove them from the slots.
^ Insert the new thread catchers.
Servicing the floor roller
aUse a coin to release the roller pin (bayonet connection), and pull out the pin.
bTake out the roller.
Remove all threads and hair etc, then reassemble the parts in the correct or- der.
Spare parts are available from your Miele dealer or from the Miele Parts De- partment.
37 |
