Maintenance and care
When to change the thread catcher pads
Check the thread catchers on the suction inlet of the floor brush, as well as those on the upholstery nozzle, from time to time.
Replace the thread catchers if the pile is worn.
Replacing the thread catchers
^ Use a knife or similar object to remove the thread catchers from the slots.
^ Insert the new thread catchers.
Servicing the floor roller
^Use a coin to release the roller pin and pull out the pin.
^Take out the roller.
Remove all threads, hair, etc. and reassemble the parts.
Spare parts are available from your Miele Vacuum Dealer or from the Miele Technical Service Department.
39 |
