en - USA - Maintenance and care
,Always turn off the vacuum cleaner and disconnect the plug from the electrical supply before cleaning or servicing the Turbobrush or vacuum.
Removing threads and hairs wrapped around the roller:
^Cut any threads or hairs that have become entangled on the brush roller with a pair of scissors. The cut pieces will be drawn in by the suction power of the vacuum cleaner the next time it is used.
More obstinate tangles or blockages can be removed after opening the Tur- bobrush roller cover. Any large parti- cles which have been drawn in can then be removed.
^Turn the grip so that the release but- ton is in the middle of the guide (illu- stration a).
^Press in the locking ring b and pull the wand until it separates from the Hand Turbobrush c.
^Lift the upper part of the casing as far as it will go, and remove any debris from the inside of the casing and from the brush roller.
^Close the casing and push the grip back into position until it clicks into place over the release button.
53 |