Dryer care
Cleaning the lint filter
The lint filter must be cleaned before or after every program.
^Open the door and remove the lint fil- ter.
^Wipe the lint off the filter with your hand (do not use any sharp objects!)
^Any lint remaining in the hollow part of the door can be removed through the gap at the bottom with a dust brush or vacuum.
^Return the lint filter and close the door.
The lint filter can be rinsed with hot water if necessary.
^Dry the lint filter before putting it back in place.
Before cleaning the tumble dryer, disconnect the machine from the power supply.
Never use abrasive cleaners, scour- ing pads or steel wool or caustic (oven) cleaners on the dryer. They will damage the surface.
Cleaning the exterior and the control panel
^The exterior and the control panel can be cleaned with warm water and liquid dish soap applied with a soft sponge.
^Wipe dry using a soft cloth.
Cleaning the drum and stain- less steel parts
^Stainless steel surfaces can be cleaned using a
^Wipe dry using a soft cloth.
16
