Installation, Front view | Miele T 8822 C instruction

Installation

Front view

	Mains connection cable	Service panel for condenser unit
	Condensed water container	Four height-adjustable screw feet
	Control panel	External drainage options (e.g. via
	Door	wash basin, wash basin drain outlet,
	Door	or gully. See "External condensed
		or gully. See "External condensed
		water outlet").

41

Image 41

Miele T 8822 C operating instructions Installation, Front view

Contents

Operating instructions For condenser tumble dryer T 8822 C Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tips Contents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Control panel Operating the tumble dryer Following are also selected via the display Programme duration / Estimated time remainingDisplay shows Tips on drying Garment care label symbolsDrying Ironing Brief instructions How to dry correctlySort the laundry Turn on the tumble dryer Drying level programmes Select any Extra options / Delay startSelect a programme Remove the laundry at the end of the programme Start the programmeBefore the end of a programme Extra options Extra options / Delay startDelay start Hand iron, Machine iron Cottons Max. load 7 kg Extra dry, NormalMinimum iron Max. load 3.5 kg Normal, Hand iron Delicates Max. load 2.5 kg Normal, Hand iron Programme chart Cool air Max. load 7 kg Shirts Max. load 2 kg Normal, Hand ironWarm air Max. load 7 kg Gentle smoothing Max. load 1 kg Changing the programme sequence Altering Delay startOnce a programme has started Adding or removing laundry after a programme has started To deactivate the lock Electronic system lockTo activate the lock Emptying the condensed water container Cleaning and care Cleaning them whilst dry Cleaning the fluff filters Cleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unit Checking the condenser unit Checking and cleaning the condenser unit housing Check and fault messages Problem solving guide Airways indicator Problem Possible cause RemedyTo switch off this To switch off this warning Programme indicator Problem Possible cause Remedy Start/Stop button isFlashing slowly Display is dark An unsatisfactory drying result Problem Possible cause Remedy Drying process Other problemsEven switches off Goes on too long or Been cleaned Problem Possible cause Remedy Water leaks fromPower cut Dryer after Changing the lamp Future updates PC After Sales serviceAppliance guarantee Optional accessories Front view Installation Transporting the dryer to its installation site Installation siteRear view Replacing the lid Levelling the appliance Before moving the tumble dryer again e.g. when moving houseRoom ventilation Washer-dryer stack Arranging the drain hose External condensed water outletGeneral notes External drainage via a sink or gully Installation conditions requiring a non-return valve Fit adapter 1 to the sink drain outlet Electrical connection U.K Non-rewireable plugs BSElectrical connection Woollens handcare Consumption data Technical data Reduced residual moisture. Laundry drier To check the settingProgrammable functions Programmable functions Anti-crease off Hour anti-crease Hours anti-crease factory default settingAnti-crease Normal buzzer Factory default setting Loud buzzer Altering the volume of the buzzer Reduced residual moisture. Laundry drier Cooling down time extended by ten minutes Extending the cooling down time Standby Factory default. Not in current pro- grammeOff Follow the steps ,, ... to pro- gramme and store in memory Factory default setting. Not in current programme Memory function Memory deactivated factory default setting Memory activated Clean out airways indicator Keypad tone Factory default setting Adjusted for very soft water Adjusting the dryers electronics for very soft water Extending the range of the drying levels Page Alteration rights reserved/0113 Nr 847 520