Electrical connection U.K | Miele T 8822 C specification

Electrical connection

Electrical connection U.K.

All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current national and local safety regulations (BS 7671 in the UK).

Ensure power is not supplied to the appliance until after installation work has been carried out.

The appliance is supplied with a mains cable with moulded plug ready for connection to a 230-240V mains supply. Please ensure the connection data quoted on the data plate match the household mains supply.

Connection should be made via a suitable switched socket which is easily accessible after installation.

For extra safety it is advisable to protect the appliance with a suitable residual current device (RCD). Contact a qualified electrician for advice.

Do not connect via an extension lead. Extension leads do not guarantee the required safety of the appliance (e.g. danger of overheating).

Non-rewireable plugs BS 1363

The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (as applicable to the design of plug fitted).

Replacement fuses should be ASTA approved to BS 1362 and have the correct rating. Replacement fuses and fuse covers may be purchased from your local electrical supplier.

WARNING: THIS APPLIANCE MUST BE EARTHED

47

Image 47

Miele T 8822 C operating instructions Electrical connection U.K, Non-rewireable plugs BS

Contents

Operating instructions For condenser tumble dryer T 8822 C Energy saving tips Caring for the environmentDisposal of the packing material Disposal of your old appliance Contents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Control panel Operating the tumble dryer Following are also selected via the display Programme duration / Estimated time remainingDisplay shows Ironing Garment care label symbolsTips on drying Drying Turn on the tumble dryer How to dry correctlyBrief instructions Sort the laundry Drying level programmes Select any Extra options / Delay startSelect a programme Remove the laundry at the end of the programme Start the programmeBefore the end of a programme Extra options Extra options / Delay startDelay start Delicates Max. load 2.5 kg Normal, Hand iron Cottons Max. load 7 kg Extra dry, NormalHand iron, Machine iron Minimum iron Max. load 3.5 kg Normal, Hand iron Programme chart Gentle smoothing Max. load 1 kg Shirts Max. load 2 kg Normal, Hand ironCool air Max. load 7 kg Warm air Max. load 7 kg Adding or removing laundry after a programme has started Altering Delay startChanging the programme sequence Once a programme has started To deactivate the lock Electronic system lockTo activate the lock Emptying the condensed water container Cleaning and care Cleaning them whilst dry Cleaning the fluff filters Cleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unit Checking the condenser unit Checking and cleaning the condenser unit housing Check and fault messages Problem solving guide To switch off this warning Problem Possible cause RemedyAirways indicator To switch off this Display is dark Problem Possible cause Remedy Start/Stop button isProgramme indicator Flashing slowly An unsatisfactory drying result Goes on too long or Other problemsProblem Possible cause Remedy Drying process Even switches off Dryer after Problem Possible cause Remedy Water leaks fromBeen cleaned Power cut Changing the lamp Optional accessories After Sales serviceFuture updates PC Appliance guarantee Front view Installation Replacing the lid Installation siteTransporting the dryer to its installation site Rear view Washer-dryer stack Before moving the tumble dryer again e.g. when moving houseLevelling the appliance Room ventilation Arranging the drain hose External condensed water outletGeneral notes External drainage via a sink or gully Installation conditions requiring a non-return valve Fit adapter 1 to the sink drain outlet Electrical connection U.K Non-rewireable plugs BSElectrical connection Woollens handcare Consumption data Technical data Reduced residual moisture. Laundry drier To check the settingProgrammable functions Programmable functions Anti-crease off Hour anti-crease Hours anti-crease factory default settingAnti-crease Normal buzzer Factory default setting Loud buzzer Altering the volume of the buzzer Reduced residual moisture. Laundry drier Cooling down time extended by ten minutes Extending the cooling down time Follow the steps ,, ... to pro- gramme and store in memory Factory default. Not in current pro- grammeStandby Off Factory default setting. Not in current programme Memory function Memory deactivated factory default setting Memory activated Clean out airways indicator Keypad tone Factory default setting Adjusted for very soft water Adjusting the dryers electronics for very soft water Extending the range of the drying levels Page Alteration rights reserved/0113 Nr 847 520