Miele T 9820 Laundry is not dry enough Possible fault Solution, Drum light does not come on

Frequently asked questions

The laundry is not dry enough.

Possible fault	Solution
The load contained too many	– Continue drying using the "Warm air"
dissimilar items (size and fabrics.)	program.
	– Select a suitable program.
The laundry is still wet. The program runs too long.
The gas supply is insufficient.	Check if the gas shut-off valve is closed.
The drum light does not come on.
The light turns off automatically	Close and open the door, the light should
(energy saving).	come on.
The bulb may be bad or burned	Change the light bulb.
out.	See "Dryer Care".

The program runs too long or stops.

Important: To fix the following problems, open and close the dryer door.

The air supply is insufficient.	Open a window or door to increase air flow.
The lint filter is clogged with lint.	Clean the lint filter.
The exhaust hose or the	– Check the exhaust parts (e.g. wall vent
connection is clogged with lint.	duct, louvered wall vent, bends, etc.)
	regularly for air permeability.
	– Remove the lint.
The laundry was not spun	Spin laundry thoroughly before drying.
sufficiently in the washer.
The dryer is over loaded.	Regard the maximum load size per
	program.
Metallic zippers prevent a correct	– Open the zippers of the laundry before
measurement of the laundry’s	drying.
residual moisture.	If the problem persists, dry items with long
	zippers using the "45 min. warm" program,
	if necessary use the laundry basket.

20