Laundry is pressed on the door and below the door | Miele T 9820

Frequently asked questions

The program is canceled.

The Anti-crease/End indicator lights.

The buzzer sounds.

Possible fault	Solution
This is not a fault.	– The indicator goes out by opening and closing
The electronic has	the door.
detected that there is no	– Single items should be dried with the
laundry in the drum and	"45 min. warm" program, if necessary use the
cancels the program.	laundry basket.
Single items or already
dried laundry can also
cause a program stop.

The program is canceled.

The "Rotary iron" or "Hand iron" indicator flashes.

The buzzer sounds.

The fault cannot be	–	The indicator goes out by opening and closing
detected immediately.		the door.
	–	Start a program.
	If the problem persists call Technical Service.
The laundry is pressed on the door and below the door.
The restriction insert in the	–	Reinsert the restriction insert in the vent opening.
vent opening at the rear of		Removing it may result in poor drying results,
the dryer was removed.		damage to the laundry and higher CO2
		emissions.

22

Image 26

Miele T 9820 operating instructions Laundry is pressed on the door and below the door

Contents

Operating Instructions for the T 9820 Gas Dryer Page What to do if YOU Smell GAS Contents Important Safety Instructions ~ Grounding Instructions Using accessories BOptions buttons Control panelAProgram buttons EStart/Stop button First use Drying tips Before loading the dryerFabric care labels Load the laundry UseSort the laundry Without the laundry basket With laundry basket Select a program Close the door Gentle Select an optionTurbo Buzzer Start the program Before the end of a program Changing a running program To cancel a programProgram end Unload the laundry Adding/removing laundry during a drying program Quick Guide Remove this guide for easy reference Load the laundry Quick GuidePrepare and sort the laundry With the laundry basket Starting a program Program end Unload the laundry Select a programSelect an option Short program guide Hand iron Rotary iron Program guide Normal load Drying program cannot be started Possible fault Solution Frequently asked questionsGeneral problems Lint has built-up on laundry Drum light does not come on Laundry is not dry enough Possible fault SolutionLaundry is still wet. The program runs too long Program is canceled Check Filter/Vent indicator flashes Fault indicatorsCheck Filter/Vent indicator lights Possible fault Solution Dryer is making a thumping or grinding sound Laundry is pressed on the door and below the door Repairs After sales serviceOptional accessories MieleCarePage User Maintenance Instructions Rinsing the lint filter Cleaning the lint filterDryer Care Cleaning the exterior and the control panel Changing the light bulb Disposal of an appliance Caring for the environmentDisposal of the packing materials Page