![](/images/new-backgrounds/1298480/29848029x1.webp)
Gas connection
Gas supply
Installation material (hoses and adapters) must be provided by the installer.
Gas connection distances
This appliance must be installed with its own shut off valve on the gas supply line. The valve must be within 6 ft.
(1.8 m), and in the same room, of the dryer.
An 1/8" NPT pressure tapping plug must be installed immediately upstream of the gas supply connection. This allows the gas inlet pressure to be checked.
Flare union adapter
1/8" NPT pressure tapping plug
Gas
For convenience (if allowed by code), an AGA or CGA approved flexible stainless steel gas hose (accordion type) may be used between the gas
If there is any doubt concerning installation, contact the Miele Technical Service Department at the phone number listed on the back of this manual.
15