IMPORTANT SAFETY INSTRUCTIONS
Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is installed, it must be of a specific type identified by the manufacturer as suitable for use with clothes dryers. Flexible venting materials are known to collapse, be easily crushed, and trap lint. These conditions will obstruct clothes dryer airflow and increase the risk of fire.
The appliance shall not be exhausted into a chimney, a wall, a ceiling, an attic, a crawl space, or a concealed space of a building.
Do not install the machine in rooms where temperatures below freezing may occur.
Proper installation is the responsibility of the installer.
Product failure due to improper installation is not covered under the Warranty.
Gas dryers are not approved for mobile home installation.
If there is any doubt concerning installation, contact Miele’s Technical Service Department.
SAVE THESE
INSTRUCTIONS
6
