Milan Technology CCSF30XX-100 Cable Specifications, Operation, Power the Media Converter, Snmp

CCSCF30xx-11x

Installation -- Continued

Power the Media Converter

The media converter is powered through the Transition Network’s PointSystem™ chassis.

Cable Specifications

Coax Cable

DS3 / E3: 75 ohm coax cable with BNC connectors

Fiber Cable

Operation

After installation, the media converter should function without operator intervention. Use the status LEDs to monitor the media converter operation in the network.

SDC	Green on	The coax link is up.
	Green flashing	The coax link is in loop-back mode.
	Yellow on	AIS (Alarm Indication Signal) on the
		coax link.
SDF	Green on	The fiber link is up.
	Green flashing	The fiber link is in loop-back mode.
	Yellow on	AIS (Alarm Indication Signal) on the
		fiber link.
PWR	Green on	The media converter is connected to
		external power.

SNMP

SDC SDF PWR

CL FL

TX

Fiber

RX

TX

Coax

RX

CCSCF

Single mode fiber (recommended): Multimode fiber (recommended): Multimode fiber (optional):

CCSCF3011-100

Fiber Optic Transmitter Power:

Fiber Optic Receiver Sensitivity:

Link Budget:

CCSCF3013-100

Fiber Optic Transmitter Power:

Fiber Optic Receiver Sensitivity:

Link Budget:

CCSCF3014-100

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

CCSCF3015-100

Fiber Optic Transmitter Power:

Fiber Optic Receiver Sensitivity:

Link Budget:

CCSCF3016-100

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

9µm 62.5/125 µm

100/140, 85/140, 50/125 µm

1300 nm multimode
min: -19.0 dBm	max: -14.0 dBm
min: -30.0 dBm	max: -14.0 dBm
11.0 dB
1300 nm multimode
min: -19.0 dBm	max: -14.0 dBm
min: -30.0 dBm	max: -14.0 dBm
11.0 dB
1310 nm single mode
min: -15.0 dBm	max: -8.0 dBm
min: -31.0 dBm	max: -8.0 dBm
16.0 dB
1310 nm single mode
min: -8.0 dBm	max: -2.0 dBm
min: -34.0 dBm	max: -7.0 dBm
26.0 dB
1310 nm single mode
min: -5.0 dBm	max: 0.0 dBm
min: -34.0 dBm	max: -7.0 dBm
29.0 dB

See the on-line documentation that comes with Transition Networks FocalPoint™ software for applicable commands and usage.

Use SNMP at an attached terminal or at a remote location to monitor the media converter by monitoring:

•Media converter power

•Line build-out

•DS3 / T3 / E3 mode

•Coax link and fiber link status (local and/or remote)

•Coax loop-back and fiber loop-back status (local only)

•AIS detected on coax link and fiber link (local and/or remote)

•Hardware/software mode

Also, use SNMP to enter network commands that:

•Enable/disable loop-back on the copper link (local only)

•Enable/disable loop-back on the fiber link (local only)

CCSCF3017-100

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

CCSCF3018-100

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

CCSCF3019-100

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

CCSCF3029-100

CCSCF3029-101

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

CCSCF3029-102

CCSCF3029-103

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

1550 nm single mode
min: -5.0 dBm	max: 0.0 dBm
min: -34.0 dBm	max: -7.0 dBm
29.0 dB
1300 nm multimode
min: -19.0 dBm	max: -14.0 dBm
min: -33.5 dBm	max: -14.0 dBm
14.5 dB
1310 nm single mode
min: -15.2 dBm	max: -8.0 dBm
min: -32.5 dBm	max: -3.0 dBm
17.3 dB

1310 nm (TX) / 1550 nm (RX) simplex

1550 nm (TX) / 1310 nm (RX) simplex

min: -13.0 dBm	max: -6.0 dBm
min: -32.0 dBm	max: -3.0 dBm
19.0 dB

1310 nm (TX) / 1550 nm (RX) simplex

1550 nm (TX) / 1310 nm (RX) simplex

min: -8.0 dBm	max: -3.0 dBm
min: -33.0 dBm	max: -3.0 dBm
25.0 dB

6 24-hour Technical Support: 1-800-260-1312-- International: 00-1-952-941-7600 techsupport@transition.com -- Click the “Transition Now” link for a live Web chat. 7