Milan Technology CCSF30XX-100 specifications Slide-in-Module Media Converter

User’s Guide

CCSCF30xx-10x

Slide-in-Module Media Converter

•DS3 or T3 / E3

•Coax (BNC) to Fiber

Transition Networks CCSCF30xx-10x series media converters encode and decode DS3 or E3 coax copper signals over fiber optic cable to extend the distance and transmission reliability of high-speed DS3 or E3 data traffic. The CCSCF30xx-10x, which is designed to be installed in a Transition Networks PointSystem™ chassis, also connects remote locations via T3/E3 cable.

Part Number		Port One - Copper	Port Two - Duplex Fiber-Optic
CCSCF3011-100		75 ohm coax (BNC)	ST, 1300 nm multimode
			2 km (1.2 miles)*
CCSCF3013-100		75 ohm coax (BNC)	SC, 1300 nm multimode
			2 km (1.2 miles)*
CCSCF3014-100		75 ohm coax (BNC)	SC, 1310 nm single mode
			20 km (12.4 miles)*
CCSCF3015-100		75 ohm coax (BNC)	SC, 1310 nm single mode
			40 km (24.8 miles)*
CCSCF3016-100		75 ohm coax (BNC)	SC, 1310 nm single mode
			60 km (37.3 miles)*
CCSCF3017-100		75 ohm coax (BNC)	SC, 1550 nm single mode
			80 km (49.7 miles)*
CCSCF3018-100		75 ohm coax (BNC)	MT-RJ, 1300 nm multimode
			2 km (1.2 miles)*
CCSCF3019-100	75 ohm coax (BNC)		LC, 1310 nm single mode
			20 km (12.4 miles)*
CCSCF3029-100 **	75 ohm coax (BNC)	SC, 1310 nm (TX)/1550 nm (RX)
			single mode, 20 km (12.4 miles)*

NOTE: The SCSCF30xx-10xmodel is the stand-alone version of the media converter. For more information, see the SCSCF30xx-10x user’s guide on-line at www.transition.com.

*Typical maximum cable distance. Actual distance is dependent upon the physical characteristics of the network.

Installation	.2
Operation	.6
Cable Specifications	.7
Technical Specifications	.8
Troubleshooting	.9
Compliance Information	12