Milan Technology Rear panel view of the MIL-S500 switch, LED-Indicators5, DC Power Connector

Figure 4. Rear panel view of the MIL-S500 switch

Auto-sensing ports for speed and Duplex

Five Auto-sensing RJ-45 ports for 10Base-T or 100Base-TX connections.

DC Power Connector

Plug this connector female end into this device, and the male into a power outlet. Supported input voltages 9 VDC at 700 mA.

Auto-sensing for MDI/MDIX

No need for crossover

LED-Indicators5

Figure 5. Front panel view of LED indications

The Table lists the LEDs available and their respective function.

LED	Status	Color	Description
Power	On	Green	The hub is supplied with suitable power.
	On	Green	The port is connecting with 100Mbps.
100Mbps			The connection between the hub and the device is
	Off		10Mbps, if the LINK/ACT light is on.

7