Milan Technology user manual MIL-S801XX switch with ST fiber port

MIL-S801XX switch with ST fiber port

Figure 2-3. The Front Panel of the MIL-S801XX switch with ST fiber port

MIL-S801XX switch with MT-RJ fiber port

Figure 2-4. The Front Panel of the MIL-S801XX switch with MT-RJ fiber port

MIL-S801XX switch with VF-45 fiber port

Figure 2-5. The Front Panel of the MIL-S801XX switch with VF-45 fiber port

RJ-45 Ports (Auto MDI/MDIX): Eight auto-sensing for 10BASE-T or 100BASE-TX connections.

In general, MDI means connecting to another Hub or switch while MDIX means connecting to a workstation or PC. Therefore, Auto MDI/MDIX means that you can connect to another switch or workstation without changing cabling.

100BASE-FX Port: There are 4 types of fiber connectors available for the MIL-S801XX switch as shown above. The distance for multi-mode fiber cabling can be extended up to 2 kilometers. However, the distance for SC single-mode fiber port is from 15 to 60 kilometers.

DIP-switch:the DIP-switch is to select Full-Duplex or Half-Duplex mode for fiber port.