4-4-4-1.Aggregator Setting
1.Group: Displays the trunk group ID.
NOTE: Before setting LACP support, you must first set the trunk group using the Port / Trunk Configuration screen.
2.LACP: Press the Space key to enable or disable the LACP (Link Aggregation Control Protocol) support. If enabled, the group is an LACP static trunking group. If disabled, the group is a local static trunking group.
3.LACP Work Port Num: The maximum number of ports that can be aggregated at the same time. If the group is an LACP static trunking group, the exceed ports are in standby mode and able to aggregate if the work ports fail. If the group is a local static trunking group, the number must be the same as group ports.
Actions->
<Edit>: Configures all items. When finished, pressing ESC returns to the action menu line.
<Save>: Saves all configured values.
<Quit>: Exits this page and returns to the previous menu.
44
