Miller Electric 251 NT manual Changing Engine Oil, Oil Filter, And Fuel Filter, Full

7-5. Changing Engine Oil, Oil Filter, And Fuel Filter

Full

4

5

3

YStop engine and let cool.

1Oil Drain Valve

21/2 ID x 12 in Hose

3Oil Filter

Change engine oil and filter accord- ing to engine manual.

YClose valve and valve cap before adding oil and run- ning engine.

Fill crankcase with new oil to full mark on dipstick (see Section 7-2).

4Fuel Filter

5Fuel Line

Replace line if cracked or worn. Install new filter. Wipe up any spilled fuel.

Start engine, and check for fuel leaks.

YStop engine, tighten connec- tions as necessary, and wipe up fuel.

2

1

Tools Needed:

Ref. ST-801 942-C / ST-800 395-B / Ref. ST-189 925-A / S-0842

OM-486 Page 25