SECTION 2 − DEFINITIONS
2-1. Symbol Definitions
Circuit Breaker | | Read Operator’s | A | Amperes | V | Volts |
| Manual |
| | | |
Positive | | Negative | | Alternating Current | | Output |
| | (AC) | |
| | | | | |
Time | h | Hours | | Temperature | | Protective Earth |
| | (Ground) |
| | |
| | | | | |
| | Welding Arc | | Work Connection | | Voltage Input |
| | (Electrode) | | |
| | | | | |
SECTION 3 − SPECIFICATIONS
3-1. Description
This belt or hydraulically-driven generator supplies ac power to the platform to run tools through an ac receptacle, and also operate lights, and cutting and welding equipment. All power regulation components are located in a water- tight box that is connected by cable to the generator. The generator supplies power when running at the specified speed with the Power switch on (switch is located on platform). A 3-pole, 30 Amp circuit breaker protects the generator from overload.
803 233
3-2. Specifications
Drive-Type | Output | Generator Speed |
| | |
| Single-Phase, 6 kVA/kW, 25 A, 120/240 V, | |
Belt-Drive/Pulley | 50/60 Hz | |
1.0 Power Factor | |
| 100% Duty Cycle | 3000 rpm (50 Hz) |
| Three-Phase 7.5 kVA/kW, 18 A, | 3600 rpm (60 Hz) |
| 240 V, 50/60 Hz, | |
Hydraulic | 1.0 Power Factor | |
| 100% Duty Cycle | |
| | |
