SECTION 4 − MAINTENANCE AND TROUBLESHOOTING
4-1. Maintenance Schedule
Y Stop engine before maintaining.
. Service more often if used in severe conditions.
* To be done by Factory Authorized Service Agent.
|
| Every 250 h |
|
| 1/2 in. | Check Belt | Replace |
| (13 mm) | Tension | Unreadable |
|
| Labels. | |
|
| Models Only) |
|
|
| Every 500 h |
|
|
| Service Welding Generator | Blow Out Inside Of |
|
| Generator. | |
|
| Brushes And Slip Rings. Service | |
|
| During Heavy Service, | |
|
| More Often In Dirty Conditions.* | |
|
| Clean Monthly. | |
|
|
| |
Overload Protection |
| ||
|
|
| Y Stop engine. |
. When a circuit breaker opens, it usually indicates a more seri- ous problem exists. Contact Factory Authorized Service Agent.
Open cover to access generator.
1 Circuit Breaker CB1
CB1 protects the generator wind- ings from overload. If CB1 opens, generator output stops.
Close covers before operating unit.
1
803 233
