Miller Electric Shopmate Series manual Remote Controls and Switches, TIG Gtaw Torches

Genuine Miller Accessories (Continued)

Remote Controls and Switches

RMLS-14 #129 337

Momentary- and maintained-contact rocker switch for contactor control. Push forward for maintained contact and back for momentary contact. Includes 20 ft (6 m) cord and 14-pin plug.

RCC-14 Remote Contactor and Current

Control #151 086

Rotary-motion (side to side) fingertip control. Fastens to TIG torch using two Velcro strips. Allows complete current and contactor control at operator’s fingertips. Includes 28 ft (8.5 m) cord and plug.

RCCS-14 Remote Contactor and Current Control #043 688

Up-and-down rotary-motion fingertip control. Great for applications that require a finer amperage control. Includes 28 ft (8.5 m) control cord.

RHC-14 Hand Control #129 340 20 ft (6 m) cord

Miniature hand control with 14-pin plug for remote current and contactor control. Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x 82 mm).

6

RFCS-14 Foot Control #043 554 Heavy-duty foot current and contactor control. Includes 20 ft (6 m) cord and 14-pin plug.

Extension Cables for 14-Pin Plugs to 14-Pin Sockets

#122 973 25 ft (7.6 m) #122 974 50 ft (15.2 m) #122 975 75 ft (22.8 m)

This extension cord makes a direct connection between the power source and the accessory control or wire feeder. No messy splicing or adapting required.

No. 2 Stick Cable Set #195 196 15 ft (4.6 m)

Consists of 15 ft (4.6 m) No. 2 electrode cable and holder, and 15 ft (4.6 m) work cable and clamp. 200 A, 100% duty cycle.

No. 2 Stick Cable Set #195 195 50 ft (15.2 m)

Consists of 50 ft (15.2 m) No. 2 electrode cable and holder, and 50 ft (15.2 m) work cable and clamp. 200 A, 100% duty cycle.

Shopmate™ 300 Running Gear/

Dual Cylinder Rack #300 145

The large 10 in (254 mm) rear wheels and

4 in (102 mm) front casters on this running gear provide excellent mobility on the shop floor, making it easier to move the power source around and over cables and cracks. Very easy to install. Handles double as weld cable holder. Holds two cylinders.

TIG (GTAW) Torches

Weldcraft® TIG Torches The Weldcraft line of TIG torches complements the most popular TIG power

source line available today. The Weldcraft torch line includes both air-cooled and water-cooled models. Available with genuine Weldcraft parts.

Air-Cooled Torch #WTP17VRM

150 amp air-cooled TIG torch with valve, flowmeter and 25 ft (7.6 m) cables.

Air-Cooled Torch #WTP26VRM

200 amp air-cooled TIG torch with valve, flowmeter and 25 ft (7.6 m) cables.

TIG (Gas Tungsten Arc Welding) Handbook #170 555

To order, call the Miller Literature Distribution Center at 1-920-751-2120, or FAX 1-920-751-2121. A comprehensive, text on all aspects of the TIG process.