TANDBERG 1000/550 for Cisco CallManager
15
Getting Started
Remote Control
The remote control is used to handle calls and to navigate the graphical user interface.
Quick keys
The three buttons on top of the remote control refer to the blocks at the bottom of the
screen. The text inside the blocks will change depending on which menu is selected
and the state of the call. The three Quick keys have different colors.
Camera control and menu navigation keys
Frequently used keys allowing you to control your own camera and the far end camera,
control your volume, select and move self-view, switch your microphone off and navigate
in the menu system.
Dialing keys
Used to make a call. The twelve number keys, (0-9), #, * operate in the same way as
on a modern push-button telephone. These buttons are also used when entering a name
into a text field.
On the T1000 for Cisco CallManager only Push-button
The push-button in front of the system
works as the CONNECT button during
an incoming call.
When in a call, the button toggles the
speaker on/off.
When the speaker is off, the audio is
available on the headset output,
marked ‘Headset’, on the back of the
system.