TANDBERG 1000, 550 Getting Started, Before You Begin, Welcome Screen, Softbuttons, Standby Mode

Getting started TANDBERG 1000/550 for Cisco CallManager

Getting Started

Before You Begin

Chances are, your system administrator or a technician will connect your new TANDBERG unit to the corporate IP network. If that is not the case, please make sure that the system administrator has registered your unit on the Cisco Call Manager.

Welcome Screen

When turning on your TANDBERG unit, the following screen will appear. This screen provide you with the telephone number(s) assigned to your unit.

Softbuttons

The three color-coded commands shown at the bottom of the screen are called softbuttons

and correspond with the quick-keys on the remote control. This means that to make a call, you can press the yellow quick-key.

TIP

IF THERE ARE MORE THAN THREE SOFTBUTTONS AVAILABLE, THERE WILL BE AN ARROW SYMBOL ON THE LEFT AND/OR RIGHT SIDE OF THE SOFTBUTTON SYMBOLS. USE THE LEFT AND RIGHT CURSOR BUTTONS ON THE REMOTE TO ACCESS THE OTHER SOFTKEYS.

Standby Mode

Your system will enter standby mode if unused for some time. In standby mode the screen will be dimmed. Pressing any key or picking up the remote control will wake up the system. An incoming call will also wake up the system.

14