TANDBERG 1000, 550 user manual

Advanced Use TANDBERG 1000/550 for Cisco CallManager

IP-address

IP-address defines the network address of the codec. This address is only used in static mode. In DHCP-mode, the assigned IP-address can be found on the View Status menu

IP-subnet mask

IP-subnet mask defines the type of network. This address is only used in static mode. Your system administrator will provide the correct value for this field.

Gateway

When using DHCP, the default gateway will be set automatically. If the LAN utilizes static IP addresses, IP address, subnet mask, and default gateway must be specified by the LAN administrator.

Ethernet Speed

Auto	The codec will auto-detect the speed/duplex on the LAN.
10/Half	The codec will connect to the LAN using 10Mbps speed/Half Duplex.
10/Full	10 Mbps speed/Full Duplex.
100/Half	100 Mbps speed/Half Duplex.
100/Full	100 Mbps speed/Full Duplex.
Restart

Pressing the Restart softbutton will restart your system. If IP-assignment is changed, it is sufficient to use this softbutton to restart the system.

26