5-6. Cleaning Or Replacing Gun Liner
Head Tube
8 mm
Tools Needed:
YDisconnect gun from unit.
8 mm / 10mm
Remove nozzle, contact tip, adapter, gas diffuser, and wire outlet guide.
10 mm
Remove liner.
Lay gun cable out straight before installing new liner.
| To Reassemble Gun: | |
| Insert new liner. | |
| Install wire outlet guide so that 1/8 | |
| in (3 mm) of liner sticks out. Hand | |
| tighten outlet guide, and then tight- | |
Blow out gun casing. | en two full turns more. | |
Cut liner off so that 3/4 in (19 mm) | ||
| ||
| sticks out of head tube. | |
| Install gas diffuser, adapter, contact | |
| tip, and nozzle. |
Ref. 802 446
