Removing Goods
At the Control Panel
Master switch ON.
Display=
WAITING FOR LOAD
******************
Move the Dryer Load Allowed switch (FIGURE
3)to NO. This tells the shuttle not to deliver a new load of goods to the dryer. (Although this switch is duplicated on the function switch panel next to the unload door, it is possible for the shuttle to send a new load to the dryer immediately, before an operator could reach the panel).
At the Function Switch Panel
FIRE AND BURN HAZARDS— Smoldering goods will fall out when unload door is opened. Stand clear with hoses while unloading.
1.Move the Manual/Automatic switch to MAN- UAL to fully open the unload door and enable the Jog switch.
2.Hold the Jog switch CW or CCW as needed to re- move goods, then return the Manual/Auto- matic switch to AUTOMATIC.
FIGURE 3 (MSSM0126AE)
Control Panel
FIGURE 4 (MSSM0126AE)
Function Switch Panel
Checking for Hidden Damage
With the machine in Manual, check for hidden damage by operating all controls (e.g. Modulating Gas valve, stripper, etc.). See “ACTUATING OUTPUTS, VIEWING INPUTS AND ACCESSING DATA ACCUMULA- TION ON THE MARK II DRYER CONTROL” in the Programming, Operating and Troubleshooting manual. To help determine why a fire occurred, see “HOW TO ACCESS DRY CYCLE DETAILS” in the same section. If the machine has no mechanical damage and all controls work normally, return machine to normal operation.
4
