IMPORTANT SAFETY INSTRUCTIONS
WARNING READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS.
Failure to heed all warnings listed below, may result in electric shock, fire and/or serious personal injury. KEEP THESE INSTRUCTIONS.
SPECIFICATIONS
Cat. | Input | USB Output | USB Output |
No. | Volts | Volts | Amps |
12 DC | 5 DC | 2.1 |
• If no Bluetooth device was previously paired, |
Bluetooth pairing will begin automatically and the |
indicator light will flash continuously. |
• The speaker will continue to search for a signal for |
10 minutes. |
• To manually pair a device, turn on the speaker and |
•Read these instructions.
•Keeps these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water. Never im- merse the apparatus in liquid or allow a liquid to flow inside the apparatus. Water entering an apparatus will increase the risk for electric shock.
•Clean only with dry cloth. Certain cleaning agents and solvents are harmful to plastics and other insulat- ed parts. Some of these include: gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning sol- vents, ammonia and household detergents containing ammonia. Clean dust and debris from vents. Keep the apparatus handle clean, dry and free of oil or grease.
•Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
•Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
•Use only attachments/accessories specified by the manufacturer.
•Only operate this apparatus in a well ventilated area.
•Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as
•A battery operated apparatus with integral batter- ies or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.
•Use battery operated apparatus only with specifi- cally designated battery packs. Use of any other batteries may create a risk of fire.
•When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire.
•Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.
•Never disassemble the apparatus or try to do any rewiring on the apparatus's electrical system.
•Donotexposethisapparatustodrippingandsplash- ing, or place objects filled with liquids on this unit.
SPECIFIC SAFETY RULES
•Maintain labels and nameplates. These carry im- portant information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.
•This apparatus is designed to be powered by a 12 volt MILWAUKEE
Federal Communications Commission
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the in- terference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
FUNCTIONAL DESCRIPTION
| 1 | 2 | 3 | 4 |
|
|
|
|
|
|
| ||
|
|
|
| 5 |
|
|
|
|
|
|
| 6 | 8 |
|
|
|
|
|
| |
|
|
|
|
| 7 |
|
1. | Volume down |
|
|
|
| |
2. | Power/Pair |
|
|
| 9 | |
3. | Stereo AUX jack |
|
|
| ||
4. | USB power outlet |
|
| 10 | ||
5. | Fuel gauge |
| 8. Hang hook | |||
6. | Volume up |
| 9. Battery bay |
| ||
7. | Indicator light |
| 10. | Bass port |
| |
SYMBOLOGY
Volts
Direct Current
To reduce the risk of injury, user must read operator’s manual.
Federal Communications
Commission
ASSEMBLY
WARNING Recharge only with the charger specified for the battery. For specific charging instructions, read the operator’s manual supplied with your charger and battery.
Inserting/Removing the Battery
To remove the battery, push in the release buttons and pull the battery pack away from the speaker. To insert the battery, slide the pack into the body of the speaker. Make sure it latches securely into place.
Fuel Gauge
The Fuel Gauge will show the remaining battery charge for
Battery Pack Protection
To protect the life of the battery pack, the speaker will shut off when the battery’s charge becomes too low. If this happens, remove the battery pack and charge it according to the charger’s instructions.
Connecting an Auxiliary Device
Connect an MP3 player, CD player, or other audio device directly to the speaker using the stereo aux- iliary jack AUX IN.
USB Power Outlet
This outlet can be used to charge a cell phone, power an MP3 player or any other device that uses less than 2.1A of DC electrical current.
NOTE: Any device that uses more than 2.1 A of DC electrical current will trip a
OPERATION
WARNING To reduce the risk of fire or electric shock, do not expose this speaker to rain or moisture.
Turning On/Off and Connecting to Bluetooth
Press the Power/Bluetooth | button to turn the |
speaker on and off. |
|
select "M12 Speaker" on the Bluetooth capable |
device. |
• Once paired, the speaker will automatically re- |
connect to the same device when the speaker is |
turned on. |
• To pair the speaker to a different device, press |
and hold the power/pair button for 3 seconds un- |
til the indicator light flashes. It will then be in pair |
mode and can be connected to a different device. |
• Once the device has successfully paired with the |
speaker, use the device controls to move through |
tracks and control volume. |
Volume
Use the 
to increase or decrease the volume. NOTE: To control the volume using the device's controls, first turn the speaker volume to max (a
beep will sound).
MAINTENANCE
WARNING To reduce the risk of injury, always unplug the charger and remove the battery pack from the charger or tool before performing any maintenance. Never disas- semble the tool, battery pack or charger. Contact a MILWAUKEE service facility for ALL repairs.
Maintaining Tool
Keep your tool, battery pack and charger in good repair by adopting a regular maintenance program. If the tool does not start or operate at full power with a fully charged battery pack, clean the contacts on the battery pack. If the tool still does not work properly, return the tool, charger and battery pack, to a MILWAUKEE service facility for repairs.
WARNING To reduce the risk of per- sonal injury and damage, never immerse your tool, battery pack or charger in liquid or allow a liquid to flow inside them.
Cleaning
Clean dust and debris from charger and tool vents. Keep tool handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean the tool, battery pack and charger since certain cleaning agents and solvents are harmful to plastics and other insulated parts. Some of these include gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household detergents containing ammonia. Never use flammable or combustible solvents around tools.
Repairs
For repairs, return the tool, battery pack and char- ger to the nearest service center listed on the back cover of this operator's manual.
2 | 3 |
