MAINTENANCE
WARNING!
To reduce the risk of injury, always unplug your tool before performing any mainte- nance. Never disassemble the tool or try to do any rewiring on the tool's electrical sys- tem. Contact a MILWAUKEE service facility for ALL repairs.
Maintaining Tools
Keep your tool in good repair by adopting a regular maintenance pro- gram. Before use, examine the general condition of your tool. Inspect guards, switches, tool cord set and extension cord for damage. Check for loose screws, misalignment, binding of moving parts, improper mount- ing, broken parts and any other condition that may affect its safe opera- tion. If abnormal noise or vibration occurs, turn the tool off immediately and have the problem corrected before further use. Do not use a dam- aged tool. Tag damaged tools "DO NOT USE" until repaired (see "Repairs"). 
WARNING!
To reduce the risk of injury, electric shock and damage to the tool, never immerse your tool in liquid or allow liquid to flow inside the tool.
Repairs
If your tool is damaged, return the entire tool to the nearest service center listed on the back cover of this operator’s manual.
WARNING!
To reduce the risk of injury, use only identical replacement parts.
FIVE YEAR TOOL LIMITED WARRANTY
Every MILWAUKEE tool is tested before leaving the factory and is war- ranted to be free from defects in material and workmanship. MILWAUKEE will repair or replace (at MILWAUKEE’s discretion), without charge, any tool (including battery chargers) which examination proves to be defec- tive in material or workmanship from five (5) years after the date of purchase. Return the tool and a copy of the purchase receipt or other proof of purchase to a MILWAUKEE Factory Service/Sales Support Branch location or MILWAUKEE Authorized Service Station, freight pre- paid and insured. This warranty does not cover damage from repairs made or attempted by other than MILWAUKEE authorized personnel, abuse, normal wear and tear, lack of maintenance, or accidents.
Battery Packs, Flashlights, and Radios are warranted for one (1) year from the date of purchase.
THE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN ARE EXCLUSIVE. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOSS OF PROFITS.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRAN- TIES, OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED FOR MERCHANTABLILITY OR FITNESS FOR PARTICULAR USE OR PURPOSE.
This warranty gives you specific legal rights. You may also have other rights that vary from state to state and province to province. In those states that do not allow the exclusion of implied warranties or limitation of incidental or consequential damages, the above limitations or exclu- sions may not apply to you. This warranty applies to the United States, Canada, and Mexico only.
ACCESSORIES
WARNING!
Unplug tool before removing or attaching accessories. Maximum Safe Operating Speed of wire brush and grinding wheel must be greater than no load RPM of tool. Guards must be used with grinding wheels and wire wheels. Only use specifically recommended accessories. Others may be hazardous.
For a complete listing of accessories refer to your MILWAUKEE Electric Tool catalog or go
Wheels For Bench Grinders
NOTE: The maximum safe operating speed shown on the grinding and wire wheels must be greater than the load speed of the tool.
Grinding Wheels
Grinding Wheels are available in 36, 60, and 80 vitrified grit for all types of grinding.
Knot Wire Wheels
Use Knot Wire Wheels for removing rust, scales and file marks.
Brushes
Brushes are made of select steel wire and have a face width of 3/4".
Cloth Buffing Wheels
Use Cloth Buffing Wheels for buff- ing metal surfaces. These wheels are made of multiple layers of select buffing cloth sewed securely to- gether and can be coated with glue and dipped in emery grit for finish grinding or rough polishing.
Plexiglass Lens
Replacement lens for all light eye shield models and Catalog No. 4995. Supplied individually.
Plexiglass Eye Shield (Pair) Furnished as standard equipment on Catalog No. 4935. Easily replaced when pitted. Supplied as a pair.
Grinder Pedestal
Heavy grey iron casting with tubular steel column. Removable water pot. Adaptable to all models.
Page 9
