AVDS - Operating the AVDS System 15
Once connected the AVDS system broadcasts to all remote monitors/speakers.
6.1 The Control Unit
Figure 13 illustrates the Control unit.
Figure 13 Control Unit
The control unit performs the following functions:
Master to All
Press the MASTER TO ALL button to send the broadcaster’s screen with audio to
all remote monitors /speakers. The LED above the button lights up.
Press the button again to release the remote monitors/speakers, allowing local
monitor viewing (when remote computers are connected).
Dark All
Press the DARK ALL button to darken all remote screens. The LED above the
button lights up. (This does not affect audio broadcasting).
Press the button again to release the remote monitors.
Adjusting the Picture Quality
When the picture needs adjusting, tune the picture as follows:
For the Remote unit
• Use a small screwdriver to turn the Picture adjuster on the Remote unit to
VDS Control Unit
Master
to all
Dark
all
MINICOM
To Broadcaster Unit’s
Control port