Minolta W121CA TSC2 Adjusting the Air Flow Direction, Ventilation, AirDirection, Operating

Operating	Adjusting the Air Flow Direction
Instructions

Additional controls and important information.

Ventilation

The ventilation lever must be in the CLOSE position in order to maintain the best cooling conditions. When fresh air is necessary in the room, set the ventilation lever to the OPEN position.

The damper is opened and room air is drawn out.

Part B

Part A

CLOSE VENT OPEN

NOTICE :Before using the ventilation feature,

position the lever, as shown. First, pull down part to horizontal line with part .

AirDirection

The direction of air can be controlled whenever you want to cool by adjusting the horizontal louver and the vertical louver.

• HORIZONTAL AIR DIRECTION CONTROL

To control horizontal direction of air flow, press the air flow direction control button and the air flow will be swept horizontally by the automatic air-swing system.

If you want to stop the air flow from moving, press the button again at the desired position of the vane.

• VERTICAL AIR-DIRECTION CONTROL

The vertical air direction is adjusted by moving the horizontal louver.

• Auto Swing Models

The horizontal air direction is automatically controlled by setting the AUTO SWING switch to the ON position.

ENGLISH

11